Date：2025-03-18 Categories：Industry News Hits：822 From：Guangdong Youfeng Microelectronics Co., Ltd(YFW)
LED packaging glue usually refers to the medium between the LED chip and the external, used to fix and protect the LED chip. Abnormal conditions of LED packaging glue may affect the performance and reliability of the LED. Here are some possible abnormal conditions and their possible: 1. Bubbles: The appearance of bubbles in the packaging glue may be due to uneven stirring, insufficient vacuum, or improper temperature control during the packaging process.2. Gel: Incomplete solidification of the packaging glue may be due to insufficient addition of curing agent or insufficient curing time. 3. Cracks: The appearance cracks in the packaging glue may be caused by excessive internal stress, uneven temperature changes, or external force. 4. Color change: The discoloration of the packaging glue may due to oxidation of the material, long-term exposure to light, or improper use of environmental conditions. 5. Insufficient adhesion: Insufficient adhesion of the glue may cause the LED chip to be fixed loosely, affecting its heat dissipation performance and stability. To solve and improve these abnormal conditions, the following measures can be taken: . Optimize the production process to ensure that the packaging glue is evenly mixed, the vacuum is sufficient, and the temperature and humidity are strictly controlled. 2. Increase the amount curing agent, extend the curing time, and ensure that the packaging glue is completely solidified. 3. Optimize the design structure to reduce internal stress and improve theability to temperature changes. 4. Use high-quality packaging glue materials, avoid exposure to strong light and harsh environments. 5. Choose packaging glue with appropriate adhesion to tight bonding between the LED chip and the substrate. In summary, abnormal conditions of LED packaging glue may affect the performance and stability of the LED, so it is necessary to strictly various parameters during production and application, and take effective measures to improve and adjust in time.
Previous：Low EMI optimized design, three-phase full bridge module (IPM) and fast recovery diodes
